Thomas Bertha April 7, 2018

There are many ways by which one can boot their virtual machines in recovery mode. In this article, we are going to focus on the most efficient ways of achieving this goal. Below is the information that is used by computer geeks everywhere to go around this task. Every step that is listed below is important, and that is why, you will need to pay attention to each point.

Steps to take:

In this method, the keys from F1, F2 and so on are very crucial so you will have to make sure that all of them are working before you begin the process of rebooting, below are the steps to take:

  1. Opening the Operating system preferences:

Firstly, the initial steps will involve starting the operating system preferences by using your keyboard. You must enable all the keys, by doing so it will serve as standard function keys.

  1. Opening the configuration pane:

The second step will involve opening of a virtual machine configuration pane. You will need to follow the steps from hardware to boot order, where you will be provided with various orders. Click on the “select boot device on startup” option. You should then start up your virtual machine and make its window dynamic by clicking on it.

  1. Press F8:

It depends on the operating system that you are using, press F8 before anything should appear on your computer screen. For some types of OS like Windows 8.1, you will have to press shift and F8 to get the same effect as other types. It is important to remember that at this point you will need patience. After booting your virtual machine, press the F8 key many times until the advanced boot option appears on your screen. If you cannot achieve this on the first try then shut down the computer and redo the process.

  1. Choose the repair option:

When the option of advanced boot appears on the screen, you can use the arrow keys to select the repair your computer option. Windows will ask you to choose the language you want and from there you will be entering your credentials and continue. If you are using the latest version of windows choose the troubleshoot option.

  1. Select boot device on startup:

After the repair or the troubleshooting process is done, the next step will be to select the boot device on startup option. It is critical to note that you may not be able to boot your virtual machine into recovery mode if you do not have a system partition. However, you can solve that by booting the machine from installation media. Booting a virtual machine is not a difficult task; all you will need to do is follow the steps that are listed above properly and you will find the solutions to your problems. If in case it still does not work and you like to know more about VMFS partition systems check out http://blushcheek.com/vmfs-partitions-stored-on-corrupted-raid-arrays-with-or-without-raid-controller.